The Internet light – should be solid green
The Syn light (or Tel.) light – should be solid green
Lan light – indicates if connected to computer with ethernet cable
Wireless light – indicates if connected with wireless USB adaptor
On pointing your web browser at http://192.168.2.1, you should see the router login page below. As no password is set by default, you simply need to click the submit button.
The Syn light (or Tel.) light – should be solid green
Lan light – indicates if connected to computer with ethernet cable
Wireless light – indicates if connected with wireless USB adaptor
On pointing your web browser at http://192.168.2.1, you should see the router login page below. As no password is set by default, you simply need to click the submit button.
To set up the router, click the Wizard link on the top menu bar.
For a UK ADSL connection, you will need to select PPPoA (Routing mode, for multiple PCs) even if you are only going to connect a single computer, then click the next button.
Type the OneTel Username and Password and verify the Password and type VCI and VPI settings.
Click next again to continue to the next phase in the wizard.
The next step does not actually require the user to enter any information, it is simply a summary screen of what you have entered so far, and allows you to verify that you have the details correct. Click the Apply button to store these settings in the router
It may take up to 5 minutes to save and update the settings. Once completed, you will see, "Connected" on the top right side of the window. Once you see that close this window and open your browser window to go to any website.
